How To Measure

Chair Cushion Wraps, Seat Only

Step 1: Measure the length of the patio cushion from the front of the cushion to the back. Measure from edge to edge, not seam to seam.

Step 2: Measure the width of the patio cushion from one side to the other. When measuring the width, be sure to measure in 3 different places and take the smallest measurement (since your existing cushions may be more worn in some areas). Remember to measure from edge to edge, not seam to seam.

Step 3: Measure the thickness of the seat. Remember that the cushion is worn so it might be flatter now. In general, wood furniture patio cushions are 2-3” thick and aluminum furniture cushions are 3-5” thick.

One Piece Chair Cushion Wrap; Seat and Back

When recovering your high back seat cushions, it’s important to take accurate measurements. Before you begin taking measurements, make sure you lay the existing high back seat cushion flat on a hard surface such as the floor.

Step 1: Measure the length of the cushion from the top of the cushion to the bottom of the cushion. Measure from edge to edge, not seam to seam.

Step 2: Measure for the width of the cushion from one edge of the seat cushion to the other. Be sure to account for any possible flattening that may have occurred over the years. Remember to measure from edge to edge, not seam to seam.

Step 3: Measure the thickness of the seat. Remember that the cushion is worn so it might be flatter now. In general, wood furniture patio cushions are 2-3” thick and aluminum furniture cushions are 3-5” thick.

Two Piece Chair Cushion Wrap, Seat Cushion and Back Cushion

Before you begin taking measurements, make sure you lay the existing cushions flat on a hard surface such as the floor.

Step 1: Measure the length of the back cushion from the top of the cushion to the bottom of the cushion. Measure from edge to edge, not seam to seam.

Step 2: Measure the width of the back cushion from one edge to the other. Remember to measure from from edge to edge, not seam to seam.

\n

Step 3: Measure the thickness of the cushion. Remember that the cushion is worn so it might be flatter now. In general, wood furniture patio cushions are 2-3” thick and aluminum furniture cushions are 3-5” thick.

Step 4: Measure the length of the seat cushion from the top of the cushion to the bottom of the cushion. Measure from edge to edge, not seam to seam.

Step 5: Measure the width of the seat cushion from one edge to the other. Remember to measure from edge to edge, not seam to seam.

Step 6: Measure the thickness of the seat. Remember that the cushion is worn so it might be flatter now. In general, wood furniture patio cushions are 2-3” thick and aluminum furniture cushions are 3-5” thick.

Chaise Cushion Wraps

Before you begin taking measurements, make sure you lay the existing cushions flat on a hard surface such as the floor.

Step 1: To get the length of the chaise, measure from the top of the cushion to the bottom of the cushion. Measure edge to edge, not seam to seam.

Step 2: Measure for the width of the cushion from one edge of the chaise cushion to the other. Be sure to account for any possible flattening that may have occurred over the years. Remember to measure from edge to edge, not seam to seam.

Step 3: Measure the thickness of the cushion. Remember that the cushion is worn so it might be flatter now. In general, wood furniture patio cushions are 2-3” thick and aluminum furniture cushions are 3-5” thick.

Bench or Glider Cushion Wraps

When recovering your bench or glider cushions for the settee or swing box, you’re going to want to take 3 measurements of your existing cushions. Lay your current bench cushion/glider cushion on a flat surface to take your measurements. Not all cushions are rectangular, some taper to the back side, so follow these easy instructions.

Step 1: Find the center of the cushion and measure the length (the shortest distance is the length) of the cushion from the front of the cushion to the back. Measure edge to edge, not seam to seam.

Step 2: Measure the width of the back of the cushion from edge to edge. Remember to measure edge to edge, not seam to seam.

Step 3: Then measure the width of the front of the cushion from edge to edge.

Step 4: Measure the thickness of the cushion. Remember that the cushion is worn so it might be flatter now. In general, wood furniture patio cushions are 2-3” thick and aluminum furniture cushions are 3-5” thick.

Signature Sling Wraps

Designed to fit a sling style chair with a folding or a rigid frame. A 10” hood slides over the back head rest of the chair, and the ties secure the wrap to the frame. You will need a fabric/flexible measuring tape to take your measurements.

Step 1: Following the contours of the chair, measure the length of the chair, from top to bottom.

Step 2: Measure the width of the chair. Most of these chairs measure 20 or 22” across.

Step 3: Note if the ties need to be in a special location. (Standard is at the end of the chair and at the mid-point.)